Skip to main navigation Skip to search Skip to main content

Comparison of cell casted and 3D-printed plastic scintillators for dosimetry applications

  • D. Kulig
  • , Kapłon
  • , G. Moskal
  • , S. Beddar
  • , T. Fiutowski
  • , W. Górska
  • , J. Hajduga
  • , P. Jurgielewicz
  • , D. Kabat
  • , K. Kalecińska
  • , M. Kopeć
  • , S. Koperny
  • , B. Mindur
  • , J. Moron
  • , S. Niedźwiecki
  • , M. Silarski
  • , F. Sobczuk
  • , T. Szumlak
  • , A. Ruciński

Research output: Contribution to journal › Article › peer-review

Abstract

Currently, the most used methods of plastic scintillator (PS) manufacturing are cell casting and bulk polymerisation, extrusion, injection molding, whereas digital light processing (DLP) 3D printing technique has been recently introduced. For our research, we measured blue-emitting EJ-200, EJ-208, green-emitting EJ-260, EJ-262 cell cast and two types of blue-emitting DLP-printed PSs. The light output of the samples, with the same dimension of 10 mm × 10 mm × 10 mm, was compared. The light output of the samples, relative to the reference EJ-200 cell-cast scintillator, equals about 40–49 and 70–73% for two types of 3D-printed, and two green-emitting cell-casted PSs, respectively. Performance of the investigated scintillators is sufficient to use them in a plastic scintillation dosemeter operating in high fluence gamma radiation fields.

Original languageEnglish (US)
Pages (from-to)1824-1828
Number of pages5
JournalRadiation protection dosimetry
Volume199
Issue number15-16
DOIs
StatePublished - Oct 1 2023

ASJC Scopus subject areas

  • Radiological and Ultrasound Technology
  • Radiation
  • Radiology Nuclear Medicine and imaging
  • Public Health, Environmental and Occupational Health

Fingerprint

Dive into the research topics of 'Comparison of cell casted and 3D-printed plastic scintillators for dosimetry applications'. Together they form a unique fingerprint.

Cite this