TY - JOUR
T1 - Guayule Natural Rubber Latex and Bi2O3 Films for X-ray Attenuating Medical Gloves
AU - Cadavid, David A.Ramirez
AU - Layman, Rick R.
AU - Nishino, Thomas
AU - Slutzky, J. Lauren
AU - Li, Zhenyu
AU - Cornish, Katrina
N1 - Funding Information:
Funding: The authors gratefully acknowledge the support provided for this project from The United States Department of Agriculture, National Institute of Food and Agriculture (Hatch project 230837)the Ohio State University (OSU) Department of Food, Agricultural and Biological Engineering (FABE); the University of Texas MD Anderson Cancer Center Department of Imaging Physics; and the USDA SBIR project 2018-33610-28544.
Publisher Copyright:
© 2022 by the authors. Licensee MDPI, Basel, Switzerland.
PY - 2022/2/1
Y1 - 2022/2/1
N2 - Existing natural latex radiation-attenuating gloves (RAGs) contain a high loading of radiation attenuation filler that reduces their mechanical properties to below Food and Drug Administration (FDA) medical glove requirements. RAGs are commonly formulated using Hevea natural rubber latex and lead-based fillers. The former can cause life-threatening allergic responses and the latter are known for their toxicity. In this work, a new lead-free RAG formulation based on circumallergenic guayule natural rubber latex (GNRL) and non-toxic radiation attenuation filler bismuth trioxide (Bi2O3) was developed. GNRL films with Bi2O3 loadings ranging from 0 to 300 PHR at different thicknesses were prepared. Radiation attenuation efficiencies (AE) at 60, 80, 100, and 120 kVp were determined and attenuation isocontour curves predicted film thickness and Bi2O3 loading required to meet or exceed the radiation attenuation requirements of ASTM D7866 and commercial RAGs. Optimal curing conditions for GNRL/Bi2O3 films with 150 PHR Bi2O3 were investigated by varying curing temperatures and time from 87 °C to 96 °C and 65 min to 90 min, respectively. In general, as the loading of the filler increased, the density of the films increased while the thickness decreased. GNRL/Bi2O3 films with 150 PHR Bi2O3 and 0.27 mm provided 5% more AE than RAG market average attenuation at the same thickness. The films with 150 PHR Bi2O3 cured under near-optimal conditions (90 °C/85 min, and 87 °C/65 min) met both the radiation attenuation standard (ASTM D7866) and the natural latex surgeon and examination glove standards (ASTM D3577 and D3578, respectively). Thus, gloves made using our formulations and protocols demonstrated potential to meet and surpass medical natural latex glove standards, offer a single product for both infection control and radiation protection instead of double-gloving, provide a greater degree of comfort to the user, and simultaneously reduce contact reactions and eliminate potential latex allergic reaction.
AB - Existing natural latex radiation-attenuating gloves (RAGs) contain a high loading of radiation attenuation filler that reduces their mechanical properties to below Food and Drug Administration (FDA) medical glove requirements. RAGs are commonly formulated using Hevea natural rubber latex and lead-based fillers. The former can cause life-threatening allergic responses and the latter are known for their toxicity. In this work, a new lead-free RAG formulation based on circumallergenic guayule natural rubber latex (GNRL) and non-toxic radiation attenuation filler bismuth trioxide (Bi2O3) was developed. GNRL films with Bi2O3 loadings ranging from 0 to 300 PHR at different thicknesses were prepared. Radiation attenuation efficiencies (AE) at 60, 80, 100, and 120 kVp were determined and attenuation isocontour curves predicted film thickness and Bi2O3 loading required to meet or exceed the radiation attenuation requirements of ASTM D7866 and commercial RAGs. Optimal curing conditions for GNRL/Bi2O3 films with 150 PHR Bi2O3 were investigated by varying curing temperatures and time from 87 °C to 96 °C and 65 min to 90 min, respectively. In general, as the loading of the filler increased, the density of the films increased while the thickness decreased. GNRL/Bi2O3 films with 150 PHR Bi2O3 and 0.27 mm provided 5% more AE than RAG market average attenuation at the same thickness. The films with 150 PHR Bi2O3 cured under near-optimal conditions (90 °C/85 min, and 87 °C/65 min) met both the radiation attenuation standard (ASTM D7866) and the natural latex surgeon and examination glove standards (ASTM D3577 and D3578, respectively). Thus, gloves made using our formulations and protocols demonstrated potential to meet and surpass medical natural latex glove standards, offer a single product for both infection control and radiation protection instead of double-gloving, provide a greater degree of comfort to the user, and simultaneously reduce contact reactions and eliminate potential latex allergic reaction.
KW - Attenuation properties
KW - Natural rubber
KW - Radiation protection
KW - Rubber composites
KW - Tensile properties
UR - http://www.scopus.com/inward/record.url?scp=85124248712&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=85124248712&partnerID=8YFLogxK
U2 - 10.3390/ma15031184
DO - 10.3390/ma15031184
M3 - Article
C2 - 35161128
AN - SCOPUS:85124248712
SN - 1996-1944
VL - 15
JO - Materials
JF - Materials
IS - 3
M1 - 1184
ER -